CME-8.8 -Hardware Conference not Working

[adeep.paul]

                   Hello all,

when i am trying to create a second conference session , " Unable to create conference " ===>. (telephony, conference hardware )

When i am using the software conference , i am able to create multiple conference .

Conferencing Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 192.168.5.1, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 3
Reported Max Streams: 40, Reported Max OOS Streams: 0
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Supported Codec: g729r8, Maximum Packetization Period: 60
Supported Codec: g729br8, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30
TLS : ENABLED

Transcoding Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 192.168.5.1, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 1
Reported Max Streams: 12, Reported Max OOS Streams: 0
Supported Codec: g729r8, Maximum Packetization Period: 60
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30

ephone-dn  18  octo-line

number A001

conference ad-hoc

preference 1

no huntstop

ephone-dn  19  octo-line

number A001

conference ad-hoc

no huntstop

ephone-dn  20  octo-line

number A001

conference ad-hoc

preference 2

ephone-dn  21  octo-line

number 500

conference meetme unlocked

no huntstop

dspfarm profile 1 transcode

codec g729r8

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

maximum sessions 6

associate application SCCP

dspfarm profile 3 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 5

[Ayodeji Okanlawon]

Adeep,

Post your full config. Can you also explain better...What do you mean a second conference session? Do you mean you already have a conference ongoing? How many people were on that conference? Or do you mean you cant add another person to the conference

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

[adeep.paul]

I am trying to create a second conference...but am getting the " Unable to create conference " error message in  the phone.. the conference which i created have three members ...

[yahsiel2004]

Can you post a full config or atleat the telephony-service portion.

Yosh

[adeep.paul]

telephony-service

sdspfarm units 10

sdspfarm transcode sessions 25

sdspfarm tag 1 confprof1

sdspfarm tag 2 Transcoder

sdspfarm tag 3 CSE_CONF

no auto-reg-ephone

fxo hook-flash

max-ephones 50

max-dn 300

ip source-address 192.168.5.1 port 2000

service phone webAccess 0

service phone ehookEnable 1

timeouts interdigit 4

system message Computer Solutions East, Inc.

url services

http://192.168.15.2/voiceview/common/login.do

url authentication

http://192.168.15.1/CCMCIP/authenticate.asp

cnf-file location flash:

cnf-file perphone

load 7942 SCCP42.9-1-1SR1S.loads

load 7962 SCCP42.9-1-1SR1S.loads

load 7970 SCCP70.9-2-1S.loads

load 7975 SCCP75.9-3-1-1S.loads

load 6941 SCCP69xx.9-2-2-6.loads

time-zone 12

date-format dd-mm-yy

live-record 400

voicemail 399

max-conferences 8 gain -6

hunt-group logout HLog

moh "flash:/MusicOnWaiting.wav"

multicast moh 239.1.1.1 port 16384

web admin system name cseadmin secret 5 $1$yPsl$IOp4k9/Gy/U5v72LVjrmy.

transfer-system full-consult

create cnf-files version-stamp Jan 01 2002 00:00:00

[Ayodeji Okanlawon]

Adeep,

Is this a meetme or ad-hoc conference?

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

[adeep.paul]

Meetme ..But i cant add the command hardware conference ...when i add the hardware conference , only one conferece is allowed in the entire system , te second conferece session will give the error "Unable to create conference"...

[Ayodeji Okanlawon]

This looks like you do not have enough dsp to configure more than one hardware conference session.

You may need to add more dsp to your router. If you send a show diag and a sh run of your gateway, we can tell how many dsp you have and advise further. Hardware conferencing supports a mix of G729 and G711 codec hence requires more DSP

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson