cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1990
Views
15
Helpful
6
Replies

CME B-ACD on Cisco 2911 with IOS 15.2(4)M5 not working

Novriadi .
Level 1
Level 1

Hi Folks,

I am currently setting up CME version 9.1 with B-ACD (app-b-acd-aa-3.0.0.2.tcl & app-b-acd-3.0.0.2.tcl), running on

Cisco 2911 with IOS ver 15.2(4)M5, this is for lab purposes.

Below is my CME & B-ACD configuration :

**********************************************************************************************

voice service voip

ip address trusted list

  ipv4 0.0.0.0 0.0.0.0

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none

h323

  h225 listen-port 1820

  no call service stop

sip

  bind control source-interface Vlan400

  bind media source-interface Vlan400

  registrar server expires max 600 min 60

!

voice register global

mode cme

source-address 172.25.202.1 port 5060

max-dn 2

max-pool 2

load 9971 sip9971.9-2-2SR1-9

authenticate register

timezone 28

time-format 24

date-format D/M/Y

tftp-path flash:

create profile sync 0004714411607756

!

voice register dn  1

number 3005

name br2phn2

!

voice register dn  2

number 3006

name br2phn4

!

voice register template  1

dialplan 1

!

voice register dialplan 1

type 7940-7960-others

pattern 1 3...

pattern 2 999

!

voice register pool  1

id mac 1C1D.86C4.0D6D

type 9971

number 1 dn 1

template 1

dtmf-relay rtp-nte

username 3005 password cisco

description 3214-3005

codec g711ulaw

!

voice register pool  2

id mac 1C1D.86C4.A574

type 9971

number 1 dn 2

template 1

dtmf-relay rtp-nte

username 3006 password cisco

description 3214-3006

codec g711ulaw

!

voice hunt-group 1 parallel

list 3002,3006

pilot 3210

!

application

service aa flash:/app-b-acd-aa-3.0.0.2.tcl

  paramspace english index 1

  param number-of-hunt-grps 2

  param handoff-string aa

  paramspace english language en

  param max-time-vm-retry 2

  param aa-pilot 3500

  paramspace english location flash://

  param second-greeting-time 60

  param welcome-prompt _bacd_welcome.au

  param call-retry-timer 15

  param voice-mail 3001

  param max-time-call-retry 90

  param service-name queue

!

service aa-drop flash:/app-b-acd-aa-3.0.0.2.tcl

  paramspace english index 1

  param service-name queue

  param drop-through-option 2

  param second-greeting-time 60

  paramspace english language en

  param max-time-vm-retry 2

  param max-time-call-retry 90

  param voice-mail 3001

  paramspace english location flash://

  param aa-pilot 3501

  param number-of-hunt-grps 1

  param handoff-string aa-drop

  param call-retry-timer 15

!

service queue flash:/app-b-acd-3.0.0.2.tcl

  param queue-len 15

  param aa-hunt10 3006

  param queue-manager-debugs 1

  param number-of-hunt-grps 2

  param aa-hunt2 3210

!

interface Loopback0

ip address 172.25.110.3 255.255.255.255

ip ospf network point-to-point

h323-gateway voip interface

h323-gateway voip id Spain ipaddr 172.25.110.1 1719

h323-gateway voip h323-id BR2-RTR

h323-gateway voip tech-prefix 1#

h323-gateway voip bind srcaddr 172.25.110.3

!

interface Vlan400

ip address 172.25.202.1 255.255.255.0

ip pim dense-mode

!

dial-peer voice 3500 voip

service aa

destination-pattern 3500

session target ipv4:172.25.110.3

incoming called-number 3500

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

!

dial-peer voice 3501 voip

service aa-drop

destination-pattern 3501

session target ipv4:172.25.110.3

incoming called-number 3501

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

!

telephony-service

no auto-reg-ephone

max-ephones 2

max-dn 2 no-reg both

ip source-address 172.25.110.3 port 2000

cnf-file location flash:

load 7965 term65.default.loads

time-zone 28

time-format 24

date-format dd-mm-yy

max-conferences 8 gain -6

moh "music-on-hold.au"

web admin system name admin password cisco

dn-webedit

transfer-system full-consult

create cnf-files version-stamp 7960 Feb 14 2014 05:54:44

!

!

ephone-template  1

softkeys connected  Endcall Hold Park Trnsfer Acct Flash

!

!

ephone-dn  1  octo-line

number 3001 no-reg both

description 3214-3001

name br2phn1

!

!

ephone-dn  2  octo-line

number 3002 no-reg both

description 3214-3002

name br2phn3

!

!

ephone  1

device-security-mode none

mac-address 189C.5DB6.D303

ephone-template 1

max-calls-per-button 5

busy-trigger-per-button 3

type 7965

button  1:1

!

!

!

ephone  2

device-security-mode none

description 3214-3002

mac-address 984B.E194.FDDD

ephone-template 1

max-calls-per-button 5

busy-trigger-per-button 3

type 7960

button  1:2

*******************************************************************************************

Problem :

1. When I test call from CME Phone both SIP and SCCP Phone by dial 3500 or 3501, I get the busy tone.

2. Debug voip dial-peer, match with dial-peer voice 3500 for (aa service) & 3501 for (aa-drop service).

3. Debug voice application script, show nothing.

Is there something wrong with my configuration ?

Rgds

Novri

6 Replies 6

MUDIT MATHUR
Cisco Employee
Cisco Employee

Hi Novriadi,

In your configuration

service aa flash:/app-b-acd-aa-3.0.0.2.tcl

service queue flash:/app-b-acd-3.0.0.2.tcl

paramspace english location flash://

Remove "/" and "//" from the configuration

Then use the call application voice load command in privileged EXEC mode to reload the scripts.

Router# call application voice load aa

Router# call application voice load queue

Router# call application voice load aa-drop

You can refer to following document as well for more info

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/bacd/configuration/guide/cme40tcl/40bacd.html#wp1018270

Please find the sample configuration that is required to configure b-acd in CME for reference.

telephony-service

moh music-on-hold.au

multicast moh 239.1.1.1 port 2000

application

service queue flash:app-b-acd-2.1.0.0.tcl

  param number-of-hunt-grps 2

  param aa-hunt2 1111

  param aa-hunt3 1222

  param queue-len 15

  param queue-manager-debugs 1

!

service aa flash:app-b-acd-aa-2.1.0.0.tcl

  paramspace english index 1

  paramspace english language en

  paramspace english location flash:

  param service-name queue

  param handoff-string aa

  param aa-pilot 8005550123

  param welcome-prompt _bacd_welcome.au

  param number-of-hunt-grps 2

  param dial-by-extension-option 1

  param second-greeting-time 60

  param call-retry-timer 15

  param max-time-call-retry 700

  param max-time-vm-retry 2

  param voice-mail 5003

!

dial-peer voice 222 voip

service aa

destination-pattern 8005550123

session target ipv4:192.168.1.1

incoming called-number 8005550123

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

Thanks & Regards,
Mudit Mathur

Thanks & Regards, Mudit Mathur

Hi Mudit,

Thank you for your response, I have tried that way before but still no luck.

I am still experiencing same error.

Have you tried B-ACD using ISR-G2 (29XX / 39XX) with IOS 15.X ?

Rgds

Novriadi

Hi All,

B-ACD works after I added "out-bound" command on dial-peer incoming facing to service aa, see below configuration :

**********************************************************

dial-peer voice 3500 voip

service aa out-bound

destination-pattern 3500

session target ipv4:172.25.110.3

incoming called-number 3500

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

!

dial-peer voice 3501 voip

service aa-drop out-bound

destination-pattern 3501

session target ipv4:172.25.110.3

incoming called-number 3501

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

********************************************************

Can anyone explain about the out-bound command on dial-peer ?

Regards

Novriadi

 

Hi Novriadi

 

is it B-CAD support SIP phone on your CME  ? 

Is it your problem has been resolved by add on out-bound command ?

Hello Novriadi

Where to find it out- bound? , I worked my support for SIP phones in b-acd.

Regards

Arnoldo

wonderful configuration guide. well done and i wish at your own pace, if you elaborate more on options, tips and tricks as well as debugs.

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: