CME Call waiting timer

[Leonardo Santana]

Hello,

There is a timer of how much a call is on hold at CME (Telephony Service/Voice Register Pool)?

Regards

Leonardo Santana

[Rob Huffman]

Hi Leonardo,

Hope all is well with you buddy! Maybe this feature is what you are looking for;

On-Hold Indicator

On-hold indicator is an optional feature that generates a ring burst on idle IP phones that have placed a call on hold. An option is available to generate call-waiting beeps for occupied phones that have placed calls on hold. This feature is disabled by default.

SCCP: Enabling On-Hold Indicator

The Call Hold feature is available by default. To define an audible indicator as a reminder that a call is waiting on hold, perform the following steps.

SUMMARY STEPS

1. enable

2. configure terminal

3. ephone-dn dn-tag [dual-line]

4. hold-alert timeout {idle | originator | shared}

5. end

From this good doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmering.html#wp1013688

Cheers!

Rob

[Leonardo Santana]

Thanks Rob,

I will test.

Regards

Leonardo Santana