cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
814
Views
24
Helpful
5
Replies

cme did and translation pattern

Marc El Achkar
Level 1
Level 1

Hello,

i hav a cme,

i am using the following translation pattern to map the e1 line to my 5 digit extension for outgoign calls,

voice translation-rule 13

rule 1 /70101/ /4528001/

rule 2 /70102/ /4528002/

rule 3 /70103/ /4528003/

rule 4 /70104/ /4528004/

rule 5 /70105/ /4528005/

rule 6 /70106/ /4528006/

rule 7 /70107/ /4528007/

rule 8 /70108/ /4528008/

rule 9 /70109/ /4528009/

rule 10 /70110/ /4528010/

rule 11 /70111/ /4528011/

rule 12 /70112/ /4528012/

rule 13 /70113/ /4528013/

rule 14 /70114/ /4528014/

rule 15 /70115/ /4528015/

my problem is i want to configure outgoing calls to start with a 9.T without forwarding the 9.

How can i add it to my translation-rule or what other solution i may have?

Best regards

1 Accepted Solution

Accepted Solutions

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

If you are using a pots dial-peer, then the 9 will be stripped automatically...are you using ISDN for PSTN?

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts

View solution in original post

5 Replies 5

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

If you are using a pots dial-peer, then the 9 will be stripped automatically...are you using ISDN for PSTN?

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts

dear aokanlawon,

i always use pots dial-peer but the 9 never get stripped, i make a translation patter for it usually (/^9/ //)

i am using E1 pri line.

lets say :

voice translation-rule 13

rule 1 /70101/ /4528001/

rule 2 /70102/ /4528002/

voice translation-profile out2

translate calling 13

dial-peer voice 60 pots

translation-profile outgoing out2

destination-pattern 9T

direct-inward-dial

port 0/0/0:15

forward-digits all

It is because you have forward-digits all...remove it under the config..

 

dial-peer voice 60 pots

no forward-digits all

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts

Hi.

Just to correct what Aok suggested.

dial-peer voice 60 pots

default forward-digits

Because command no forward-digits all will apply forward digits 0

Anyway, 5p to Aok because he has always a good answer

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

I didnt know that Carlo (+5) Thanks for the post

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts