About Marc El Achkar

Marc El Achkar · ‎12-07-2018

hi, in the datasheet they do not mention that it work with 8851, they mention 8865 compatibilioty

Marc El Achkar · ‎12-07-2018

Solved in voice register pool put the session transport TCP

Marc El Achkar · ‎12-07-2018

Hello, CP-8800-V-KEM= does it work with 8851? anyone tested it?

Marc El Achkar · ‎02-22-2018

Hello, we have a CME with 8821 IP Phones, both on latest firmware, the 8821 are registered and working but after a while some 8821 wireless phones loose the registration to the CME, the ping to these 8821 keep working but they loose registration. To fix it we will have to try create/ no create profile many times and sometimes that doesn't work and we will have to restart the CME. All 8821's have fixed IP's. We had non cisco wireless AP's and we switched to Cisco AP's (standalone AP's around 6 AP's) the problem is very annoying to the customer as any 8821 phone can stop working at any time

Marc El Achkar · ‎02-21-2018

Hello, we have a CME with 8821 IP Phones, both on latest firmware, the 8821 are registered and working but after a while some 8821 wireless phones loose the registration to the CME, the ping to these 8821 keep working but they loose registration. To fix it we will have to try create/ no create profile many times and sometimes that doesn't work and we will have to restart the CME. All 8821's have fixed IP's. We had non cisco wireless AP's and we switched to Cisco AP's (standalone AP's around 6 AP's) the problem is very annoying to the customer as any 8821 phone can stop working at any time.

Marc El Achkar · ‎11-23-2017

Hello, we have a BE6K. Can we Transfer incoming calls to specifics extensions based on the calling numbers? For example i want all incoming numbers starting with 01XXXXXX to go to 222, while 06XXXXXX to go to 223. I use MGCP Gateway. Best regards Mark

Marc El Achkar · ‎11-23-2017

if the Gateway is MGCP is it possible to achieve this? (transfer incoming calls to specific extension based on calling numbers)

Marc El Achkar · ‎08-23-2016

Hello, im configuring UCCX v11, i setup the phone service for the Agent login as per the URL: http://192.168.200.12:6293/ipphone/jsp/sciphonexml/IPAgentInitial.jsp when i press the service button from the phone it takes some time then it gives me host not found. my UCCX server name is CCX and the domain is .local, im not sure if that is directly related to my issue, can we change the UCCX server name to an IP to make sure its targeting the UCCX? or like we do for the CUCM under the enterprise parameters? i completed the basic config for the end user/agent and phone but i cant get passed the agent login issue, any help please. Best regards Mark

Marc El Achkar · ‎11-30-2015

Thank you for your answer, but what i need is to monitor it from the phones and not from RTMT

Marc El Achkar · ‎11-30-2015

Hello, I have a CUCM and an h323 gateway, is it possible to monitor the fxo lines for incoming and outgoing calls from the phone to know if busy. Best regrads Mark

Marc El Achkar · ‎10-02-2015

Ok for the CME I tested a 3rd party softphone for IPhone named Join and for Android I used CSIPSimple and they are working fine. For CUCM I tested the Jabber Phone only mode and its working. Best regards Mark Achkar

Marc El Achkar · ‎09-23-2015

Hello guys, the problem is also with ios 9 on iphones released few days ago, the jabber voice also stopped working, i was wonderinbif there is a way to make the jabber app to work with cucme or is there any 3rd party app we can use?

Marc El Achkar · ‎09-23-2015

Hello, Is there a way to make jabber 11.0 on iPhone to work with CME and how? Best regard Mark

Marc El Achkar · ‎06-01-2015

Hello, I have a CME with sip phones like 8851 and I would like to monitor FXO lines from the SIP phones, anyone have any config guide or example for it. Best regards Mark

Marc El Achkar · ‎11-21-2014

Hello , I want to connect an E1 to E1 DTI voice 30 channel transparent connection through WAN PSTN---E1 (router) Wan --- Wan (router) E1---PBX Anyone can help with the above configuration? I want the E1 connection to be transparent from the PSTN to the PBX for full voice usage.

Date Registered	‎02-17-2011 11:23 PM
Date Last Visited	‎12-12-2018 08:33 PM
Total Messages Posted	80

Re: CP-8800-V-KEM= does it work with 88...

Re: 8821 with CME loosing registration

CP-8800-V-KEM= does it work with 8851?

8821 with CME loosing registration

8821 with CME loosing registration

Transfer of incoming calls based on cal...

Re: Can you send a copy of the

UCCX 11 Login Agent Host not found

Thank you for your answer,

CUCM H323 gateway FXO line monitoring

Ok for the CME I tested a 3rd

Hello guys, the problem is

IPhone Jabber 11.0 with CME

CME: how to monitor FXO line from a SIP...

E1 to E1 DTI voice 30 channel transpare...