05-24-2010 12:03 AM - edited 03-15-2019 10:54 PM
Hi Guys,
Is there any way to direct specific incoming call from PSTN to a specific dial-peer range number on CME using COR? - 3 CMEs, only 1 cme connected to PSTN.
for example, public phone number 7771234 that originate from PSTN only allow to ring dial-peer range 7771000-7771005 on CME-A then public phone number 7771235, only allow to ring dial-peer range 7771006-7771010 on CME-C.
please advice
Thanks in advance
05-24-2010 02:02 AM
Do you need to direct on the basis of phone line, or calling number ?
05-24-2010 03:43 AM
Hi, thanks for your reply...
I need to direct on the basis of calling number
thanks,
terrence
05-24-2010 03:52 AM
Diffrent details but same principle:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml
On the DP matrching answer-address, translate called number to desired destination.
05-24-2010 04:06 AM
Hi,
Thanks for the links.
Do you have any documentation with COR?
Restrict outgoing call seems to be easier than incoming...
Thanks,
Terrence
05-24-2010 04:22 AM
I would use number transaltion in your case actually.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide