CME Extension Mobility and ephone-template question

[phershaw]

  The Extension Mobility section of the CME admin guide has the following note:

" Templates created using the ephone-template and ephone-dn-template commands can be applied to a user profile for Extension Mobility."

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html#wp1162977

but there is no detail or example of how this is achieved.

Does anyone know if this is possible and if so, how?

Thanks,

Phil

[Hythim Ali El Hadad]

Hi Phil,

It mean that when you create "voice user-profile" for Extension Mobility service

You will need to assign a needed softkeys and any other option

You can use ephone-template for this

As ephone-template 1

Then under all required voice user-profile, you can apply this ephone-template to them

Voice user-profile x

ephone-template 1

Regards

Haitham

[phershaw]

Hi Haitham,

What you say seems logical and something I have already tried but the option of configuring an ephone-template under a voice user-profile is not available in the CME versions I have tried.

I would be interested to know if you have have you actually got this working on a CME and if so what version ?

Thanks,

Phil