10-06-2014 03:36 PM - edited 03-17-2019 12:26 AM
Dears,
I am trying to upload a firmware for 3905 phones in CME 9.1 but i couldn't, also GUI is not working for me I don't know where things are going wrong with me.
Attached are the configs
Thanks
Solved! Go to Solution.
10-07-2014 04:18 AM
10-07-2014 04:29 AM
are you using any locale package?
Oct 7 14:24:31: TFTP: Looking for SIP_English_United_States/cin-sip.jar Oct 7 14:24:31: TFTP: Sending error 1 No such file Oct 7 14:24:31: TFTP: Server request for port 3072, socket_id 0x3C372FCC for process 181 Oct 7 14:24:31: TFTP: read request from host 192.168.4.35(3072) via GigabitEthernet0/0 Oct 7 14:24:31: TFTP: Looking for United_States/g3-tones.xml
10-07-2014 04:32 AM
Dear
No i have not uploaded any locale or ring tones file in tftp.
thanks
10-07-2014 05:30 AM
Can you just try to giving below command only ..
tftp-server flash:CP3905.9-4-1-0.loads
tftp-server flash:APP3905.9-4-1-0.zz
Suresh
10-07-2014 06:43 AM
Dear Suresh,
I tried the commands but it didn't worked,
Thanks
10-07-2014 06:52 AM
Dear Javelkur,
If it is searching for the locale and ringtones files , i saw the package of CME 9.1 i didnt see these files.
thanks
10-07-2014 07:04 AM
try copying the english us locale files to flash and test
download the latest
http://software.cisco.com/download/release.html?mdfid=277641082&softwareid=282897001&release=10.5&relind=AVAILABLE&rellifecycle=&reltype=latest
make sure to copy cin-sip and g3-tones and config the tftp path as well
if that still fails, collect the same debugs and post
10-07-2014 02:12 PM
10-07-2014 08:20 PM
looks like it did upgrade in the logs
check in , sh voice register pool phone-load or in the phone manually
10-07-2014 10:36 PM
Dear Javelkur,
this is the phone i am playing with, i dont have pysical access but remotely i can access the router.
#sh voice register pool 9
Pool Tag 9
Config:
Mac address is BC67.1CDC.D91A
Type is 3905
Number list 1 : DN 9
Proxy Ip address is 0.0.0.0
Current Phone load version is Cisco-CP3905/9.2.1
Class of Restriction List Tag: default
Incoming corlist name is user-national
DTMF Relay is enabled, rtp-nte
Call Waiting is enabled
DnD is disabled
Video is disabled
Camera is disabled
Busy trigger per button value is 0
keep-conference is enabled
registration expires timer max is 3600 and min is 60
kpml signal is enabled
Lpcor Type is none
Transport type is udp
service-control mechanism is supported
registration Call ID is moCIRLFM0tCLxFbfel949AlVM607C9kB
Registration method: per line
Privacy feature is not configured.
Privacy button is disabled
active primary line is: 120
contact IP address: 192.168.4.35 port 5060
Phone SIS Version: 5.0.0
GW SIS Version: 1.0.0
conference admin: no
conference add mode: all
conference drop mode: never
paging-dn: config 0 [multicast] effective 0 [multicast]
Dialpeers created:
Dial-peers for Pool 9:
dial-peer voice 40008 voip
corlist incoming user-national
destination-pattern 120$
session target ipv4:192.168.4.35:5060
session protocol sipv2
dtmf-relay rtp-nte
digit collect kpml
codec g711ulaw bytes 160
no vad
after-hours-exempt FALSE
Statistics:
Active registrations : 1
Total SIP phones registered: 8
Total Registration Statistics
Registration requests : 12
Registration success : 12
Registration failed : 0
unRegister requests : 11
unRegister success : 11
unRegister failed : 0
Attempts to register
after last unregister : 0
Last register request time : 00:53:48.320 GMT Wed Oct 8 2014
Last unregister request time : 01:44:23.052 GMT Wed Oct 8 2014
Register success time : 00:53:48.320 GMT Wed Oct 8 2014
Unregister success time : 01:44:23.052 GMT Wed Oct 8 2014
10-08-2014 04:55 AM
Dear Javelkur,
thanks +5 for you
the voice register pool 9 command show the phone is not upgraded but when i asked somebody to check manually the phone information, it was upgraded to 9.4
thanks for all your replies
10-08-2014 04:56 AM
good to know , but odd why it wont show in the cme
10-06-2014 10:45 PM
Please send the complete running config for gui issue , what browser are you trying , do you see any error on the browser
Please enable , deb tftp event , and send the logs for the firmware upgrade issue
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide