05-28-2012 05:21 PM - edited 03-16-2019 11:23 AM
Hello,
I have a CME 8.6 running on a 2811 ISR.
It is currently configured with Extension Mobility. Phones are all 7960.
I want to implement presence and have followed the admin guide to do so, but I've come across a problem
blf-speed-dial command.
When trying to do this under ephone<tag> it says
"Please configure under logout profile for em enabled phone"
How does this work when it's configured for the logout profile and not the user profile?
I did try and configure it under there and it does not do anything.
btw I only have 1 logout profile for the entire system.
Regards
Felix
Solved! Go to Solution.
05-28-2012 07:10 PM
Hi
The BLF is to be configured in Logout profile only. See below link and see section "Configuring a Logout Profile for an IP Phone"
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html
Command is
speed-dial speed-tag number [label label] [blf]
Regards
Ronak patel
Please rate helpful posts by clicking stars below the answer.
05-28-2012 07:10 PM
Hi
The BLF is to be configured in Logout profile only. See below link and see section "Configuring a Logout Profile for an IP Phone"
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html
Command is
speed-dial speed-tag number [label label] [blf]
Regards
Ronak patel
Please rate helpful posts by clicking stars below the answer.
05-28-2012 08:30 PM
Hi Ron,
So in CME the phone appearance is a combination of
1) the voice user-profile
AND
2) logout profile
Which means I should have a unique logout profile for each user who is on EM and wants BLF?
Regards
Felix
05-30-2012 05:34 PM
Just to add that this is now working.
When you configure the BLF under the logout profile it "adds" it in the voice user-profile.
you can see the change when doing a show run, that the blf speed dial commands now appear under the user-profile.
Thanks
Felix
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide