I got a CME connected with PBX, the pbx sip license is only 10 sip trunks, the CME has about 80 registered phone.
There is a VIP cisco number that i need to make it reachable from the nortel pbx any time.
There are 7 outgoing dial peers for mobile calls, national, international , etc ...
I only limited the dial peers with max-con 2, so that the possibility that the 10 sip trunks is small, and added a new dial peer for the VIP number with no max-con, but the cisco phone users complain they can't make calls with the pbx lot of times.
Also i can't control the incoming sip trunk, for example, if 9 sip trunks are used, i don't need any more sip trunks incoming or outgoing except for the vip numbers.
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...