Trying to Create a HW conference bridge with 4 sessions and up to 32 particapents per conference. Call Manager version 7.1.2
Created a hardware conference bridge on Cisco 2811.
The problem is, that when I add this DSP farm to the media resource group, all looks good. I see the resources being used when initiating a conference but there is no voice.
Here are the PVDM's installed on the router.
NAME: "PVDMII DSP SIMM with three DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with three DSPs"
PID: PVDM2-48 , VID: NA , SN: FOC09411T4N
NAME: "PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 5", DESCR: "PVDMII DSP SIMM with one DSP"
PID: PVDM2-16 , VID: NA , SN: FOC093626P7
Configuration for the DSP farm on the router
voice-card 0
dsp services dspfarm
sccp local FastEthernet0/0.16
sccp ccm 10.13.16.50 identifier 2 priority 2 version 7.0
sccp ccm 10.13.16.51 identifier 1 priority 1 version 7.0
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0.16
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 1 register MeetMe_CFB
!
dspfarm profile 1 conference
description Conferencing for MeetMe
codec g711ulaw
codec g711alaw
maximum conference-participants 32
maximum sessions 4
associate application SCCP
!
WIN_DSPFARM#show dspfarm all
Dspfarm Profile Configuration
Profile ID = 1, Service = CONFERENCING, Resource ID = 1
Profile Description : Conferencing for MeetMe
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP Status : ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 4
Number of Resource Available : 4
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXE
0 2 24.3.7 UP N/A FREE conf 1 - - -
0 2 24.3.7 UP N/A FREE conf 1 - - -
0 5 24.3.7 UP N/A FREE conf 1 - - -
0 5 24.3.7 UP N/A FREE conf 1 - - -
Total number of DSPFARM DSP channel(s) 4
