04-10-2010 12:56 AM - edited 03-15-2019 10:11 PM
Hi all,
One of our customer requested for an upgradation, from Exsting 30 channels to 150 channels.Current configuration is attached.Kindly help to configure the same.
Customer requirement.
[1], Additionl PVDM modules on the routers to support more VOIP channel.
[2], Additional 4 E1 ports for voice trunks between router and customer PBX.
[3], Soft upgrade the Internet Access link(LL=10M, port=2M) to Internet Access link(LL=10M, port=2M).
[4], Need to add 120 channel on IP Trunking gateway.
Current configuration and Diagram attached.
Thanks in advance.
Lijesh
04-10-2010 06:40 AM
And your question is ?
Please do not solicit for urgent help on a freely contributed user forum.
If you need pre-sale and configuration support, engage a reputable consultant or certified cisco partner.
04-10-2010 06:51 PM
Hi bevilacqua,
I understand the importance of the forum, that was a immediate requirement and i don’t have much knowledge about Voice related things.
Would be helpful if you can give some inputs on this.
Thanks in advance.
Lijesh
04-11-2010 04:13 AM
Since you have no experience, I recommend you engage a reputable professional or certified partner.
Otherwise, it will be impossible for you to satisfy your customer requests.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide