04-02-2012 04:56 AM - edited 03-16-2019 10:25 AM
Hi
I have Cisco Call manger Express 8.0 .
i need to setup a Dummy number 0800XXXXX in CME.
whenever any user will call this number , that call should be answered by a person in the office.
If this is possible, can anyone tell me the procedure of doing the same .
Thanks a Ton in advance !!!!
04-02-2012 05:00 AM
Hi
Configure Ephone-dn with the desired number. and Assign this dn to ephone of the person who will answer the call.
Regards
Ronak patel
Please rate helpful posts.
04-02-2012 07:21 AM
Not sure if you can define an ephone-dn that covers a range. You can build a translation rule that translates the range into a specific number that is assigned to the person you want the calls to go to, here is an example:
voice translation-rule 1
rule 1 /^0800...../ /5555/
!
voice translation-profile Block
translate called 1
and then assign this profile under telephony-service. You may also be able to use num-exp if you like.
HTH,
Chris
04-03-2012 03:24 AM
Thanks a Lot , chris .. yes translation pattern works .. Cheers !!!!!!
04-03-2012 05:54 AM
Awsome, great it worked for you!
Please rate all useful posts!
Chris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: