Configure Cisco to automatically answer Fax calls

[ElwinMkanyika]

Hi guys!

Is it possible to configure cisco so as to answer Fax calls automatically or is this done from the fax end ? Here are my current configurations.

voice-port 0/0/0

input gain -6

output attenuation 5

cptone RU

timeouts call-disconnect 2

description FAX_109

station-id name FAX_109

!

dial-peer voice 1 pots

corlist incoming In810

description Fax109

destination-pattern 109

port 0/0/0

no register e164

!

[Rob Huffman]

Hi Elwin,

This is generally set on the Fax machine itself under a config

like "Rings to Answer". Here is an example

https://h10025.www1.hp.com/ewfrf/wc/document?docname=c01363811&cc=ca&destPage=document〈=en&lc=en&product=3758394&tmp_docname=c01363811

Cheers!

Rob

"Spend your life waiting,
for a moment that just don't come,
Well, don't waste your time waiting" 

-Springsteen

[ElwinMkanyika]

Thanks Rob. Finally set the fax on automatic

Regards,

Faith