configure e1 lines using mgcp service

[fheya_g.ramos1]

hi,

really  sorry for asking but i am new to this. How do we configure e1 lines using mgcp service? what other interfaces should i configure to make it work?  

[Vivek Batra]

Hi,

https://supportforums.cisco.com/document/90521/mgcp-gateway-integration-cucm-and-pstn-service-provider

http://www.cisco.com/c/en/us/support/docs/voice/media-gateway-control-protocol-mgcp/23966-mgcp-pri-cm.html

- Vivek

[fheya_g.ramos1]

hi, Do i also have to configure translation rule and dial peer so we can use IDD, NDD, and local calls and mobile calls?

[Vivek Batra]

Hi,

With MGCP, all digit manipulation and call routing decision happens in CUCM. You can not use dial peers and translations at gateway level when using MGCP.

- Vivek

[Jaime Valencia]

You can find plenty of info if you simply google MGCP configuration or MGCP example

http://docwiki.cisco.com/wiki/Voice_Gateways_FAQ#How_to_configure_an_IOS_MGCP_GW.3F.3F