cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2496
Views
5
Helpful
2
Replies

Configure second line in ATA 187

alexageorge
Level 1
Level 1

I am having an ata 187, which i successfully added in the call manager (ver 8.6.2). Now i need to add the second line in the ata and connect a another device there. Please help me with the configuration for the same. Also do we need any additional license for enabling the second line.

 

Regards,

Alex George

1 Accepted Solution

Accepted Solutions

Dragan Ilic
Level 4
Level 4

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/187/1_0/english/administration/guide/sip/187adm80/a187_ag2str.html#wp1102295

Second port is new device with MAC shifted and add "01" at the end.

You would need additional essential UCL license for this...

 

HTH,

Dragan

HTH,
Dragan

View solution in original post

2 Replies 2

Dragan Ilic
Level 4
Level 4

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/187/1_0/english/administration/guide/sip/187adm80/a187_ag2str.html#wp1102295

Second port is new device with MAC shifted and add "01" at the end.

You would need additional essential UCL license for this...

 

HTH,

Dragan

HTH,
Dragan

It is worth mentioning that the first two characters in the mac addressed are removed from mac address to create the second device which gets the 01 is added at the end.