Configuring Cisco 3945 as H323 Gateway and SCCP SRST

[Mohibur Rahman]

Hi Everyone

I will have to configure SRST on Cisco 3945 for our remote site.

This ISR will also act as remote-site’s main router and also will have some Analogue phones.

Our main site has Call Manager 8.6.2.

I’m planning to configure H323 Gateway with SCCP SRST option and SCCP Ports for Analogue phones.

Can someone please point me to the right direction for some good step-by-step documentation?

• Configuring H323 Gateway (Cisco 3945)
• Configuring SCCP SRST with  H323 Gateway (Cisco 3945)
• Configuring SCCP ports with H323 Gateway.

Any other suggestion would be very helpful and highly appreciable.

Thanks and regards,

Mohib

[Wilson Samuel]

For H323 please observe the configurations suggested in the following link

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/h323/configuration/15-mt/voi-h323-15-mt-book/voi-h323-cfg-gateways.html

For SCCP SRST Please follow the guide below:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_setting_up_using_sccp.html

Make sure that the Remote Site has been added with correct SRST Reference in CCM and in the respective Device Pool.

HTH

[Mohibur Rahman]

Hi Wilson

Thanks for your respond.

I'll check these links.

Regards,

Mohib