Hi guys,
I have a customer who wants a prompt to be played saying " we are sorry we cannot connect your call please dial xxxx" during SRST mode.
I believe all I need to d is to record the prompt and place in router flash and then reference it in my paramete confi as follows...
application
service queue flash:app-b-acd-2.1.0.0.tcl
param queue-manager-debugs 1
service aa flash:app-b-acd-aa-2.1.0.0.tcl
paramspace english index 1
paramspace english language en
paramspace english location flash:
param service-name queue
param handoff-string aa
param aa-pilot 405...
param welcome-prompt _welcome.au
!
dial-peer voice 222 voip
service aa
destination-pattern 405...
session target ipv4:192.168.1.1
incoming called-number 405...
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
Will this work? How does the scrip temrinate the call after the prompt has been played, or can the prompt be replayed for about 3 times before it is disconnected.
Also, how do I ensure that this is only played during SRST and not during normal operation?
Thanks
Please rate all useful posts