cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1092
Views
0
Helpful
4
Replies

connection plar syntax in version 15

mflanigan
Level 1
Level 1

Running 15.0(1)M4 in a 2901.  I'm migrating a 2800 config which has the following voice port config:

connection plar opx 8400.

This syntax doesn't work in version 15.  The options are "connection plar tied 8400" or simply "connection plar 8400"> Is the opx functionality available in version 15?

Thanks

1 Accepted Solution

Accepted Solutions

Try M5, if still trouble, contact the TAC.

View solution in original post

4 Replies 4

Hello,

Where exactly are you trying to type the connection plar , i have configured multiple gateways under the 15.X , it is all working.

I only configure it under the voice-port

voice-port 0/3/0:15
cptone JO
connection plar 7555

Amer

Aner,

I'm entering it under the voice port.  Connection plar itself works fine, but I can't enter "connection plar opx 1234".  This was accepted under 2800/12.2 SW

Try M5, if still trouble, contact the TAC.

Thanks.  M5 behaved the same.  I've opened a TAC case