06-28-2017 02:35 AM - edited 03-17-2019 10:40 AM
Hello Friends,
I have CME 10.5
and registered CIPC phone there..
ephone-dn 1
number 5805
name Bob
!
!
ephone 200
mac-address F8B1.56C9.B225
type CIPC
button 1:1
!
Incoming and outgoing is working perfectly and COR configuration is working perfectly with SIP Phones i.e. Cisco 3905 and Cisco 7821.. but when I am trying to apply COR configuration in CIPC.. I am not able to find any option in ephone configuration option.
I am using ISR 4321 Version 03.16.05.S - (recommended one)
Enclosed is the show run of the router for your consultation and kindly ignore the IP sheme or ip available on the show runn
06-28-2017 04:25 AM
Apply the COR list on the Ephone-dn and see if that works or not.
HTH
Regards
Abhay
Kindly rate all helpful posts !!!
06-28-2017 04:27 AM
option , not coming..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide