Could you let me know to add to the line-group many member at once ?

[Takuro Moriyama]

Dear Experts,

Hi. I have Cisco Unified Communications Manager  of version 10.5.2.
I want to know  how to add to the line-group many member at once.

I checked on CCO the Line Group Setup page as below.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide-90/CUCM_BK_CDF59AFB_00_admin-guide_chapter_0100011.html

But, I didn't find procedure to add many member to the line-group a once.

If you know it procedure Please let me know.

Best Regards,
takuro

[Mohammed al Baqari · Accepted solution]

Press Ctrl and select multiple line group members
 

[Mohammed al Baqari]

Agreed with Chris. I think you have limited options.

[Takuro Moriyama]

Dear mohammed al baqari,

Thank you very much for your prompt reply and great advice.
I agreed to that.

[Chris Deren · Accepted solution]

Use typical button combinations, shift to select range or control to select many individual DNs.

[Takuro Moriyama]

Dear mohammed al baqari, Chris Deren,
Hi. Thank you for your reply.
Sorry, I couldn't explain enough what I want to do.

I already know procedure to add multiple DNs. "CTRL and Select DNs".
I want to know procedure to add multiple DNs by like a BAT.

There are about 500 DNs in my CUCM.
So, I'm very hard work to add many DN to use CTRL and Select.

Is it possible to add many  DN by like a BAT at once ?

Best Regards,
takuro

[Chris Deren]

I am not aware of BAT way, the only way i could see this is to create an application that uses SOAP AXL API to load it directly to database.

[Takuro Moriyama]

Dear Chris Deren,

Thank you very much for your prompt reply and great advice.
I agreed to that.