05-06-2019 12:17 PM
Does the 8800 V-KEM work with the 8865-3PCC? I purchased one and plugged it into the phone and it isn't powering up. I have a power cord on the phone too so it isn't pulling power from PoE.
05-07-2019 08:55 AM
1. Whats the software version on the phone?
2. Whats the value set for KEM Type? (On device webpage Voice->Att Console->General->KEM Type)
Thanks.
05-07-2019 09:44 AM
05-07-2019 09:47 AM
05-07-2019 10:17 AM
Please upgrade to 11.2.3MPP.398 available for download on Cisco software download and retry.
Thanks.
05-07-2019 10:18 AM - edited 05-07-2019 10:20 AM
Firemware 11.2(3) is required for 8865 KEM support.
The KEM only supports 802.3at PoE, so depending on the switching setup, I would think a power adapter would need plugged directly into the KEM. It is how many of mine are die to not supporting 802.3af for the 8865.
In the image, it looks as if the device is configured correctly as all that should be required is the "Number of Units" setting.
Please review the admin guide, section Cisco IP Phone Key Expansion Module for more details specific to the 8865.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide