11-21-2010 11:43 PM - edited 03-16-2019 02:02 AM
Hi,
I am planning to install and configure Cisco CTL client and two tokens are required as a pre-requisite. I need to know whether these token has to be purchased from Cisco and if there is a prt number for these tokens,or the Communications Manager itself can generate the token.
Regards,
Mohammad
Solved! Go to Solution.
11-22-2010 04:08 AM
Hi mohammad,
The Cisco Security Administrator Security Token (SAST) is hardware device that needs to be purchased from cisco. The call manager cannot generate it. For more information refer the following :
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/csa_token_ids/sec_tkn.html
The part number for the device is KEY-CCM-ADMIN-K9= .
Regards
Ishan
PS rate useful posts
11-22-2010 04:08 AM
Hi mohammad,
The Cisco Security Administrator Security Token (SAST) is hardware device that needs to be purchased from cisco. The call manager cannot generate it. For more information refer the following :
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/csa_token_ids/sec_tkn.html
The part number for the device is KEY-CCM-ADMIN-K9= .
Regards
Ishan
PS rate useful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide