Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team,
My customer has a question around being able to automate configuration of CUBE's. They deploy CUBEs in mass and want to be able push configuration to the CUBE routers(mainly ISR 4k -> CAT 8K) using Ansible.
Any experience around this?
Than...
Hi Paul,After you changed the IP of the TFTP server it is posiible that the phone is requesting a firmware above 8.1.1..The phone should upgrade to the firmware but its not possible to upgrade a single phone .You will have upgrade all the phones of a...
Hi Paul ,Normally this error occur when the Ip phone is trying to upgrade to 8.1.2 or later prior to going 8.1.1 . If this is the case kindly upgrade those ip phones to 8.1.1 and then to the latest one .Here is the link from where you can download ...
Hi ,voice translation-rule 1 rule 2 /.*/ /5551234/voice translation-profile dial translate called 1 ephone-dn 1 dual-line number 1000 translation-profile outgoing dialUsing the above commands you should be able to achieve what you want.Whenever...
Hi Boris,Cisco IP communicator is not supported on the MAC OS . This has nothing to do with the call manager version.Even if you upgrade your CCM ,the IP communicator will not work on a MAC OS.Hope this helps.Regards,Ishan
