cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1251
Views
10
Helpful
3
Replies

CUBE SIP to SIP full E.164 ANI

 
Everyone's tags (5)
3 REPLIES 3
Highlighted
Hall of Fame Master

CUBE SIP to SIP full E.164 ANI

Try updating IOS. If still trouble, you can use a voice translation-rule or SIP profile to add it back.

Highlighted
Contributor

Re: CUBE SIP to SIP full E.164 ANI

What IOS version are you running, I've seen similar behavior on 15.1(3)T. I've seen this in one direction only, from cucm to itsp. In the other direction, itsp to , the gateway sends the full +e164 number (which is what I want).

Outbound

Dial-peer voice 1 VoIP

Destination pattern .T

!

Inbound

Dial-peer voice 2 VoIP

Destination-pattern +3130.......

!

When adding a second outbound dial-peer that starts with destination pattern +.T the + is send!

Regards,

Erik

Sent from Cisco Technical Support iPad App

Highlighted

CUBE SIP to SIP full E.164 ANI

Yes, the problem is inbound and already using latest IOS for this old box 15.1.3T4. Seems like a bug, right? I manage to add it back via a trans rule and not a sip profile but anyway I want to know if this is normal behavior or maybe o config issue or just a bug.

Thanks a lot,

Alex.

CreatePlease to create content