01-22-2020 04:46 PM
Is there a way to update partition on random users in CIsco unity connection 11.5 through Bulk tool
Solved! Go to Solution.
01-23-2020 05:11 AM
You should be able to do this by going to Users, then in upper right corner press Go for "Bulk Edit by CSV", select the CSV file with user ALIASes, after upload and verification you will be able to check "Partition" and select desired partition from the drop down. This assumes all users in the job are changing to the same partition.
01-23-2020 02:03 AM - edited 01-23-2020 02:11 AM
You can use Bulk Edit for this sort of change, it's convenient if you can show all the relevant users on one page. Do a search or something to bring up the list, tick the ones you want to change and select Bulk Edit from the bottom. You can then edit individual fields and the change is applied to all the selected users.
01-23-2020 05:11 AM
You should be able to do this by going to Users, then in upper right corner press Go for "Bulk Edit by CSV", select the CSV file with user ALIASes, after upload and verification you will be able to check "Partition" and select desired partition from the drop down. This assumes all users in the job are changing to the same partition.
01-23-2020 05:20 AM - edited 01-23-2020 05:22 AM
I thought it could be done with an Update User CSV, but that doesn't seem to support a column for partition.
01-23-2020 07:04 AM
Thanks Chris. I am able to update the partition now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide