CUCM 10.5 and Remote VPN Phone Setup Requirements

[Quintin.Mayo]

We need to move to another suite in the same building. We would like to know if our  CUCM version 10.5  have the ability for remote phones? AnyConnect? We are looking for documentation that inform of the requirements and set up with remote VPN phones? I found the document below but not sure if this is what we are looking for?  Please advise, any assistance would be greatly appreciated.

https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/116162-trouble-anyconnect-vpn-phone-00.html

Everyone's tags (0)

[Quintin.Mayo]

We need to move to another suite in the same building. We would like to know if our  CUCM version 10.5  have the ability for remote phones? AnyConnect? We are looking for documentation that inform of the requirements and set up with remote VPN phones? I found the document below but not sure if this is what we are looking for?  Please advise, any assistance would be greatly appreciated.

https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/116162-trouble-anyconnect-vpn-phone-00.html

[ManishGogna]

Hi Quintin,

Please check the following

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/10_0_1/secugd/CUCM_BK_C68276B4_00_cucm-security-guide-100/CUCM_BK_C68276B4_00_cucm-security-guide-100_chapter_010010.html

HTH

Manish