02-15-2018 08:36 AM - edited 03-17-2019 12:13 PM
Hello
I have small inquiry regarding 4321 with ucse140N for cue 9.0.x virtual
My scenario which i am trying to achive is
Gi 0/0/0
Gi 0/0/0.100 - - - xyz vlan
Gi 0/0/0.120 - - - abc vlan
Gi 0/0/0.104 - - - svi 172.23.104.2 + (voice phones, cimc n esxi, cue ip)
ucse subslot 2/0
imc ip add 172.23.104.5/24
Imc-port dedicated
ucse 0/2/0
ip unnumbered gi 0/0/0
Negotiate auto
Switchport mode trunk
ucse 0/2/1
Negotiate auto
Switchport mode trunk
ip route 172.23.104.5 255.255.255.255 ucse 0/2/0 - - - cimc (even no need bcz of dedicated port)
ip route 172.23.104.6 255.255.255.255 ucse 0/2/0 - - - esxi
SW - - - CME gi 0/0/0
SW - - - ucse ge2
SW - - - laptop
My problem is unable to ping and access esxi after all this. Cimc n router sub interface ping is ok from laptop. Even unable to ping esxi from router
M i missing something or something wrong with this
Pls advice
02-15-2018 09:35 AM
02-15-2018 09:55 AM
Hello N
Yes i saw that doc but my problem and even in this doc with sub interfaces its not mentioned. In my scenario if sub interfaces are there i am not able to reach esxi. I tried everything
But if removersub interface and with normal int settings. I am able to reach esxi n ping etc but only with sub interfaces its not happening n i cracked my head with everything. I dont know why
02-15-2018 01:07 PM
02-16-2018 03:12 AM
Yes pls if you open tac internally, looks like some limitation
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: