02-12-2008 04:46 AM - edited 03-15-2019 08:46 AM
Hello folks,
I have upgraded CUCM 4.1(3) to CUCM 6.0. But Cisco CallManager service is not running, though it is activated.
I have not uploaded the phones and node licenses yet. Would Cisco CallManager service not run without license or it is a different issue?
Can please someone point me to where I should look?
Many thanks.
Shoaib Usmani.
Solved! Go to Solution.
02-12-2008 05:19 AM
Hi Shoaib,
I beleive you are most correct here! The CCM Service will not start until the Licenses have been loaded and the nodes rebooted.
Hope this helps!
Rob
02-12-2008 05:19 AM
Hi Shoaib,
I beleive you are most correct here! The CCM Service will not start until the Licenses have been loaded and the nodes rebooted.
Hope this helps!
Rob
02-12-2008 05:24 AM
Thanks Rob!
Your reply is much appreciated.
Regards,
Shoaib.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide