cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3569
Views
10
Helpful
4
Replies

CUCM 8.6 console session time out

it
Level 1
Level 1

How do I prevent call manager (8.6) to log me out every 5 minutes?

Is there way to change the default session time length?

Thanks!

4 Replies 4

Chris Deren
Hall of Fame
Hall of Fame

Here is the link to the actaul command:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/8_6_1/cli_ref_861.html#wp313461

HTH, please rate all useful posts!

Chris

Thanks Chris,

This command is not working for CUCM 8.0.3, is this normal?.



http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/cli_ref/8_6_1/cli_ref_861.html#pgfId-284171

set cli session timeout

This command sets the time, in minutes, after which an active CLI session times out and disconnects.

Be aware that the new session timeout value becomes effective immediately for a new CLI session; however, active sessions retain their original timeout value. Also the show cli session timeout command reflects the new value, even if the current session does not use that value.


Note This setting gets preserved through a software upgrade and does not get reset to the default value.


Command syntax

set cli session timeout minutes

Parameters

  • minutes specifies the time, in minutes, that can elapse before an active CLI session times out and disconnects.

Value range: 5-99999 minutes

Default value: 30 minutes

Requirements

Command privilege level: 1

Allowed during upgrade: No

If you mean you cannot find it, most likely because it's not implemented in that version.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/8_6_1/delta/delta.html#wp1911609

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: