02-28-2012 04:34 AM - edited 03-16-2019 09:49 AM
Hello,
I am using some called party transformation patterns on CUCM 8.6 to some destionations. However I need not to show the prefix on the calling line's display. I noticed that this works for CUCM-SIPtrunk-CUBE-SIPtrunk calls but it doesn't for CUCM-SIPtrunk-CUBE-ISDN calls.
Some examples:
CUCM-SIPtrunk-CUBE-SIPtrunk
CUCM-SIPtrunk-CUBE-ISDN
What I want to know is if I can get the called number behaviour on the ISDN scenario behaving like in the SIP-SIP scenario.
Stoyan
Solved! Go to Solution.
03-27-2012 05:37 AM
Date Created: 27-MAR-2012 12:35 PM Created By: Hennenlotter, William L(WHENNENL,36926) Made the following changes to his IOS SIP gateway:
~~~~~~~~~~~~~~~
conf t
voice service voip
sip
update-callerid
~~~~~~~~~~~~~~~
Conf t
Voice class sip-profiles 1
request UPDATE sip-header Remote-Party-ID modify "Remote-Party-ID:
response 200 sip-header Remote-Party-ID modify
"Remote-Party-ID:
~~~~~~~~~~~~~~~
Conf t
dial-peer voice XXX voip
voice-class sip profile 1
~~~~~~~~~~~~~~~
The update-callerid affected called party display before ringback.
The update affected called party display during ringback.
The 200 ok affected called party display after connected.
~~~~~~~~~~~~~~~
03-27-2012 05:37 AM
Date Created: 27-MAR-2012 12:35 PM Created By: Hennenlotter, William L(WHENNENL,36926) Made the following changes to his IOS SIP gateway:
~~~~~~~~~~~~~~~
conf t
voice service voip
sip
update-callerid
~~~~~~~~~~~~~~~
Conf t
Voice class sip-profiles 1
request UPDATE sip-header Remote-Party-ID modify "Remote-Party-ID:
response 200 sip-header Remote-Party-ID modify
"Remote-Party-ID:
~~~~~~~~~~~~~~~
Conf t
dial-peer voice XXX voip
voice-class sip profile 1
~~~~~~~~~~~~~~~
The update-callerid affected called party display before ringback.
The update affected called party display during ringback.
The 200 ok affected called party display after connected.
~~~~~~~~~~~~~~~
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide