CUCM "DIAL-PEERS"

[isaaco001]

Hi everyone,

I am familiar with CME and would like to understand the equivalent of dial-peers in CUCM. I trying to connect a CME to a CUCM through their dial-peers. where are dial-peers configured in CUCM?Am new to CUCM and guides or links to this issue will be appreciated.

Thanks!

[George Sotiropoulos]

Hello Isaac,

You may read the following document for interconnection of CUCM with CME:

http://www.firewall.cx/cisco-technical-knowledgebase/cisco-voice/922-cisco-voice-cucm-cme-h323.html

Generally speaking, you will need to create connetivity (H323 or SIP trunk) between the 2 systems and then create route-patterns, which are the equivalent of the dial-peers on the CME.

You will find various posts at Community concerning this subject.

Hope this helps,

George

[Jaime Valencia · Accepted solution]

You want to do some reading on this:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan.html