CUCM translation rules

[LaurentMichel]

Hi,

I have the following setup. SIP trunk Provider --> Cube --> SIP trunk  to CUCM.

We are having a special dial pattern to dial outside. *9*external_number. The *9* is removed on the outgoing dial leg of the CUBE.

When I make a call from my IP communicator in the format *9*0032258785 the number on the phone is changed to 0032258785 after the call is connected.

Is there a way to keep the number with the leading *9* on the screen?

We have a issue with our IVR. The IVR is monitorring the call for reporting purposes. But when the call is connected we receive a <calledid>0032258785. This should remain *9*0032258785

Kr,

Laurent

[Rajan · Accepted solution]

Hi Laurent,

You need to use connected number display as explained nicely by Vivek in this document:

https://supportforums.cisco.com/blog/12726551/connected-number-display-phone

HTH

Rajan

Pls rate all useful posts