08-17-2014 04:00 AM - edited 03-16-2019 11:46 PM
Hi Guys,
I am plan to upgrade the call manager from the version 8.6 to 10.0.,while upgradating from 8.6 can i directly upgradte to 10.0? should i need to order any Migration Licenses?
08-17-2014 04:20 AM
Advice me on this upgradation steps
08-17-2014 08:47 AM
You can refer below upgrade guide, it will help you to plan perfectly.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.html
You need to request the license via Product Upgrade Tool, you need to get converted DLUs to UCL/CUWL from Cisco as per your requirement, license structure has changed in 9.x and later.
CUCM 10.0 and beyond is only supported in a virtualized deployment so you need to take care of it.
Suresh
08-17-2014 10:00 PM
Dear Suresh,
Thanks for your information,
Its already in a Virtual deployement,we dont have the subscription for ucss.
08-17-2014 11:26 PM
Hi Siva,
If you do not have the UCSS, then ,, u need to contact Partner who could provide u with BoQ for migration.
regds,
aman
08-18-2014 01:06 AM
Hi Aman,
Thanks fo the info.
08-18-2014 02:13 AM
Hi Siva,
Basically, PCD is an pplication used for migration of legacy CUCM clusters version 6.1.5, 7.1.5 , 8.x to new VM based servers.Also, to change IP address on CUCM 10, switch versions,reboot and install COP files.
In your case, u can upgrade to 10 even without PCD. Just need to check the compatibility matrix.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/10_x/CUCM_BK_CD1DB914_00_compat_matrix.html
regds,
aman
08-18-2014 01:01 AM
Hello
1-As mr/Aman , you will need to purchase UCSS for 1 or 3 years up to youfrom one of the Cisco parteners resellers , which allow you to do upgrade ,then you can purchase as optional ESW which is useful to contact TAC for any upgrade Bugs .After that we can do convert from DLU to UCL via the product upgrade tool (PUT). Keep in your mind 6 DLUs converted to 1 X UCL.
Thanks
please rate all useful infromation
08-18-2014 01:05 AM
Thanks for the valuable information.
08-18-2014 01:24 AM
Dear Islam,
Should i required PCD for this upgradation?
08-18-2014 03:36 AM
Hello
I have a question , the upgrade will be for only CUCM or CUC , CUCX?.
You have the both ways "UCSS or PCD" // "where PCD do not need for licesnes" .PCD is a special feature for V10.X .
1-The PCD SW & ova should be shipped along with the CUCM 10.x bootable image.You should be able to find the OVA in www.cisco.com downloads section using the following path.
or
2-Downloads Home > Products > Unified Communications > Call Control > Cisco Unified Communications Manager (CallManager) > Cisco Unified Communications Manager Version 10.0 > Unified Communications Manager Virtual Machine Templates-10.0(1).
Thanks
please rate all useful information
08-18-2014 03:43 AM
Hello
Kindly check the below link which is very useful . The below link includes also Video
https://supportforums.cisco.com/blog/12108306/cisco-unified-communication-manager-cucm-10x
Thanks
please rate all useful information
08-18-2014 05:38 AM
Dear kamal,
The upgradation is for CUCM,UC,CWMS,CUCX.
08-18-2014 07:03 AM
Hello
PCD used for CUCM doesnt support CUC and UCCX migration at the moment .Just FYI
PCD used for migrate from VM to VM ,and it comes with v 10.x.Direct Migration from "6.1(5),7.1(3)/7.1(5),8.0(1-3),8.6(1-2),9.x TO v10.0+".migration support "A-old IP/Hostname for all cluster nodes", "B-Changing IP .hostname for one or more nodes".
Thanks
please rate all useful information
08-17-2014 07:49 PM
You also need to review the RNs and new and changed documentation prior to any actual work on the servers.
You can also consider PCD
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide