06-11-2015 09:47 AM - edited 03-17-2019 03:19 AM
Hello,
I have a cluster 1 (publisher) 3 (
The thing is I have firewall on both sides and they are Fortigate, my question is, is there any special configuration I have to do on the Fortigate
Thanks.
06-11-2015 09:54 AM
Did you review the TCP and UDP port usage guide for CUCM and made sure nothing is getting blocked???
06-11-2015 10:07 AM
06-11-2015 10:47 AM
Hi.
Did configure a site to site vpn between those two firewalls?
Please refer to the following doc for tcp/udp communications on a CUCM cluster
HTH
Regards
Carlo
06-11-2015 11:18 AM
Hello Carlo,
What doc?
06-11-2015 11:44 AM
Sorry
As usual I've forgotten the link:)
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/port/9_1_1/CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-91/CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-91_chapter_01.html
Sorry
Carlo
06-11-2015 12:05 PM
Hello Carlo,
I already checked the ports and they are open as the document is requested.
Thanks.
06-11-2015 12:42 PM
Hi.
Have you checked the delay between Main and remote site ?
I remember you that it should be 40 ms one way.
Which is the output of a show network cluster
If possible post the result here
Let us know
Regards
Carlo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide