09-17-2013 08:45 AM - edited 03-16-2019 07:25 PM
Running "debug ccsip all" and seeing no output. Other debugs show output (debug ip icmp).
Code is:
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.2(4)S1, RELEASE SOFTWARE (fc3)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Sat 06-Oct-12 11:55 by mcpre
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.2(4)S1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsuppo
The uknit is a ASR1002. SIP Calls are going through the gateway and SIP is functioining. Trying to get the debugs to work.
I see another person had same issue but fixed it with "credentials" I see no mention of this variable in documentation that I can find.
All help will be appreciated Thanks
09-17-2013 08:50 AM
Hi.
Configure logging on your router
logging buffered 4096
logging monitor debug
HTH
Regards
Carlo
Please rate all helpful posts
"The more you help the more you learn"
09-17-2013 08:57 AM
Thank you for suggestion.
I have made changes and still no CCSIP debugs.
As stated all other debugs tested do show up in log and to screen (term mon).
09-17-2013 08:59 AM
Hi Have you also tried with debug ccsip messages instead of debug ccsip all?
Let me know
Regards
Carlo
Please rate all helpful posts
"The more you help the more you learn"
09-17-2013 09:03 AM
Yes I picked individual debug CCSIP commands and have same issue. NO output.
Thank you
11-12-2019 02:58 AM
11-13-2019 06:56 AM
If you have the configuration command "no logging monitor" then you won't see anything on an SSH session, even with the "term mon" command.
09-17-2013 02:27 PM
Can you please attach your actual configuration?
Thanks
Carlo
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide