debug isdn no output

[Mary]

I have one issue, when I debug isdn q931 on branch voice gateway, it says no resource available, what's the root cause and how to resolve it?

I debug in headquarter voice gateway, there is no output, what's the root cause? thanks

[Mohammed al Baqari]

Your memory usage most likely is very high. Check it using show mem
command.

[Mary]

memory is normal and cpu utilization also normal

[Mary]

mem and cpu utiliz normal

[Mohammed al Baqari]

Use CLI Analyzer to interpret the output of your show tech. It will
pinpoint resource problems.

https://cway.cisco.com/go/sa/

[Aadhil Salim]

please share debug isdn q931 screen shot

[Georgios Fotiadis]

Can you describe the exact call flow and attach the output of debug isdn q931 and debug voip ccapi inout.

[Mary]

this is still under investigation

[Aeby Vinod]

what is the output of "show isdn status", Also have you already tried everything else recommended on this thread?

Please rate if you find this helpful.

Regards,
Aeby