cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
512
Views
0
Helpful
1
Replies

debug isdn q931

Scofield05
Level 1
Level 1

Hello

 

I have the following question for which I could not find a clear answer searching the internet.

 

Call received from outside dispaly aditionnal 0000 : As exemple 

 

we recieve from international call 000000XXXXXXXX INSTEAD OF 00XXXXXXXX 

 

When i run the command DEBUG ISDN q931 , i found the result attached here 

 

Any help will be appreciated.

1 Accepted Solution

Accepted Solutions

Create a voice translation rule to remove the extra zeros and attach it to an appropriate place in your configuration. Where depends on the specifics in your setup. For example the below would drop the extra zeros from your international calls.

voice translation-rule 10

 rule 1 /^0000\(00.*\) /\1/

voice translation-profile PSTN-IN

 translate calling 10

See this document for more details, https://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/61083-voice-transla-rules.html

 

 



Response Signature


View solution in original post

1 Reply 1

Create a voice translation rule to remove the extra zeros and attach it to an appropriate place in your configuration. Where depends on the specifics in your setup. For example the below would drop the extra zeros from your international calls.

voice translation-rule 10

 rule 1 /^0000\(00.*\) /\1/

voice translation-profile PSTN-IN

 translate calling 10

See this document for more details, https://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/61083-voice-transla-rules.html

 

 



Response Signature


Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: