delay in connecting call

[SJ SJ]

i am facing delay in dialing calls from Cisco CP3905 registered on CME. It takes around 10 seconds to connect the call. How to reduce this time in Cisco CME with SIP phone 3905 registered to it.

[Manish Gogna]

Hi,

can you add the following under voice register pool for 3905 and test again

digit collect kpml

Manish

[SJ SJ]

this command is not available. 

IOS Version c3845-adventerprisek9-mz.151-4.M10.bin

[Yelbanz]

Hi, Same problem encountered. May i know what is the resolution made to resolve this issue.

[Maren Mahoney]

My first guess would be that you are encountering the interdigit timeout.

Suggestion: Start a new post describing your problem. Post a copy of your CME config and dial-peers (or better yet the entire config on the router...sanitized of course). That will get more attention than commenting on an old post.

Maren