03-22-2010 02:47 AM - edited 03-15-2019 09:53 PM
Dear all,
I have call manager 4.2(3).
If there is an IP phone1 call another IP phone2 and allready this IP phone2 has an existing call with IP phone3, but, IP phone1 hearing the ringing tone normally and don't know that IP phone2 has an existing call with IP phone3.
So, i am asking if i can configure a waiting message to IP phone1 to inform him that IP phone2 is allready have another call at the same time.
Thanks a lot for your cooperation.
Solved! Go to Solution.
03-22-2010 03:31 AM
No version of callmanager has this feature (call waiting conformation).
So, either you disable call waiting, or learn that when phone rings free, either the person is not there, or do not want to answer.
03-22-2010 04:13 AM
Hi
To disable call waiting, set the 'Busy Trigger' setting on the line to 1.
Regards
Aaron
Please rate helpful posts..
03-22-2010 03:31 AM
No version of callmanager has this feature (call waiting conformation).
So, either you disable call waiting, or learn that when phone rings free, either the person is not there, or do not want to answer.
03-22-2010 03:46 AM
Thanks a lot for your reply, but, how to diable call waiting, or learn that when phone rings free, etiehr the person is not there, or do not want to answer.
03-22-2010 04:13 AM
Hi
To disable call waiting, set the 'Busy Trigger' setting on the line to 1.
Regards
Aaron
Please rate helpful posts..
03-22-2010 04:57 AM
Thx a lot for all of you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide