11-22-2011 06:26 AM - edited 03-16-2019 08:10 AM
Hi guys,,
i need to configure distinctive ringtone feature in cme (different ring from pstn and internal extension)
,, but i have one confusion below in the description it is saying that ring pattern for all types on incoming calls..which means if i configure "ring external".. it choose one external ring pattern for all internal calls and external calls?
or it will choose different ringing for external calls.
cme admin guide
Step 5
ring {external | internal | feature} [primary | secondary]Example: Router(config-ephone-dn)# ring internal
Designates which ring pattern to be used for all types of incoming calls to this directory number, on all phones on which the directory number appears
Solved! Go to Solution.
11-22-2011 09:22 AM
Hi Hamid,
Yes, if you use (config below) you will receive a different ring for External (PSTN) calls vs Internal calls
;
Router(config-ephone-dn)# ring external
Cheers!
Rob
11-22-2011 07:16 AM
Hi Hamid,
Just for External calls
Here is a better description;
Distinctive ring is used to identify internal and external incoming calls. An internal calls is defined as a call originating from any Cisco Unified IP phone that is registered in Cisco Unified CME or is routed through the local FXS port.
Cheers!
Rob
11-22-2011 08:37 AM
Hi Rob,
thanks for your reply, but i am asking if issue this command
will it ring differently for internal calls and externals call PSTN,,
11-22-2011 09:22 AM
Hi Hamid,
Yes, if you use (config below) you will receive a different ring for External (PSTN) calls vs Internal calls
;
Router(config-ephone-dn)# ring external
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide