06-23-2023 02:08 AM
Hi Collaboration Engineers,
I have task to manipulate outgoing call from Ext to ITSP Number , if i am using SIP Trunk method i can configure easy
The Problem , now i am using FXO Port , as far as i know for outgoing call only forward to Port and FXO will process that call
is it possible to making DOD outgoing call from IP Phone (via FXO Port) ?
For example i want ext 1000 always using number 021111222 for outgoing call ?
Lets start discuss !
06-23-2023 03:19 AM - edited 06-23-2023 04:37 AM
Suppose it should be possible, it should just be a matter of crafting the dial peers to fit your needs.
06-23-2023 03:31 AM
Thanks Roger,
Lets check about my config
voice translation-rule 3
rule 1 /^91\(.*\)/ /\1/
!
voice translation-rule 4
Rule 1 /^1000/ /02111112222/
voice translation-profile OutgoingFXO
translate calling 4
translate called 3
!
dial-peer voice 211 voip
description *** Inbound From CUCM to PSTN ***
session protocol sipv2
incoming called-number .
voice-class codec 1
voice-class sip bind control source-interface Port-channel1
voice-class sip bind media source-interface Port-channel1
dtmf-relay rtp-nte
no vad
!
dial-peer voice 301 pots
trunkgroup pstn
translation-profile outgoing OutgoingFXO
destination-pattern 91T
forward-digits all
!
For that config , already tested , But IP Phone get number ITSP random from port , not spesific according my translation rule
06-23-2023 03:51 AM
Please share the configuration for the trunk group and the output of debug voip ccapi inout.
06-23-2023 04:33 AM - edited 06-23-2023 04:34 AM
Outgoing calls egressing an FXO port only supports transmitting the DNIS, not ANI. There is no point in having a calling party translation rule there; it’ll never work.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide