Does Cisco AS5350XM Can be a Master Clock Source?

[mazloumi.arash]

Hello

we want to order one cisco AS5350XM and one AD-NET Channel Bank.

in our case we want to add 30 co-line to channel bank and get E1 line from and connect that to Access Server,

but the channel bank does not support Master Clock.

I'd like to know whether AS5350XM can generate clock?

if it can be a clock source how should it config?

if its not possible, is that a solution for that?

Your Sincerely

Thank you very much indeed

[paolo bevilacqua · Accepted solution]

All cisco E1 / T1 interface can, of course, generate clock.

[mazloumi.arash]

Dear Paolo

Thanks for your Reply

Would you please help me with the detail configuration of that.

Thanks in advance

[paolo bevilacqua]

My best advice: use the search feature on cisco.com.

Thanks for the nice rating and good luck!

[mazloumi.arash]

Dear Paolo

another question,

what is the BITS interface on access server, and does it needed for my situation?

Thanks

[paolo bevilacqua]

http://en.wikipedia.org/wiki/Building_Integrated_Timing_Supply

You don't need it.

[mazloumi.arash]

Dear Paolo

I test the clock command under the E1 controller but the command doesn't exist
how can i set the clock on E1 Controller?

Please Guide me, i'm in a bad situation.

Thanks

Kind Regards

[paolo bevilacqua]

It should really be there.

[Brian Lavallee]

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008031a072.shtml#as

tdm clock priority 1 freerun

[paolo bevilacqua]

Yeah thanks Brian, rated.

[mazloumi.arash]

Thanks Every one i hope this work for me