12-12-2019 12:22 PM
Hi
I have 2 parallel 3925E (IOS 15.6) systems configured for call routing between 2 parallel gateways and internal PBX's
I need to do maintenance on one of the systems so I want to stop the establishment of new calls whilst maintaining existing calls until they end normally. The result would be that all calls would process via the alternate system.
Is there a way to gracefully shutdown call processing on IOS system ?
My thought was to shutdown the incoming dial-peer(s),
However, if I do that, does that disconnect the established calls ?
Thanks in advance
Mark
Solved! Go to Solution.
12-13-2019 06:25 AM
Hi,
Once the call is established and if you shutdown the dial-peer, the established call will not drop.
12-12-2019 02:41 PM
12-12-2019 03:02 PM
I think the solution to my problem is to use
voice service voip
sip
call service stop
Without the force.
Until I can do the graceful shutdown, I cant configure the test - self defeating loop
12-13-2019 06:25 AM
Hi,
Once the call is established and if you shutdown the dial-peer, the established call will not drop.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide