12-31-2008 08:30 AM - edited 03-15-2019 03:17 PM
Hi, I'm trying to use module WS-X6348-RJ-45 with WS-F6K-PWR in a 6509 with a Cisco IP Phone 7975G without success.
Just to confirm, Does the sub-module WS-F6K-PWR support 802.3af
Thanks in Advanced
Solved! Go to Solution.
12-31-2008 08:49 AM
Hi Andre,
Sadly, the WS-F6K-PWR only supports Cisco pre-standard PoE.
WS-F6K-PWR
Maximum Power Per Port (W) 6.3
Table 55-5 Efficiency of Voice Daughter Cards
The 7975 is a Class 3 device which has;
Required Power (W) 15.4
Hope this helps!
Rob
12-31-2008 08:49 AM
Hi Andre,
Sadly, the WS-F6K-PWR only supports Cisco pre-standard PoE.
WS-F6K-PWR
Maximum Power Per Port (W) 6.3
Table 55-5 Efficiency of Voice Daughter Cards
The 7975 is a Class 3 device which has;
Required Power (W) 15.4
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide