08-10-2009 04:17 AM - edited 03-15-2019 07:17 PM
My Customer have a gateway model 2801 with 03 analogical lines in fxo interface that are using ro send and receive by pstn.
In this topology there are IP Phone too. My question is: It's possible that a one specific directory number to do call only
by interface 02 fxo?
Thanks,
Wilson Santana
08-10-2009 04:25 AM
Please provide more information on the protocols and call agents that you are using. It cannot be determined from the information provided.
-nick
08-10-2009 04:30 AM
Hi Nick,
My Customer is using mgcp, the CallManager is version 5.1.3
Thanks,
Wilson
08-10-2009 05:21 AM
Yes, CSS and partitions
Create route patterns associated to that FXO and make sure only that phone can reach it.
HTH
java
if this helps, please rate
08-10-2009 09:54 AM
08-10-2009 10:07 AM
Hi,
Could you please post the confi in .txt format, I cant install the WinRAR on my machine (and so do I think of many others)
Regards
Wilson Samuel
08-10-2009 10:09 AM
Hi Wilson,
is: It's possible that a one specific directory number to do call only
by interface 02 fxo?
I didnt understand your question pretty well?
If I understand correctly, all you want is the branch office wants to go to the PSTN using the FXO card and would also like to recieve/make calls on that the FXO card.
If yes, then you have to configure things on the CCM, in order to make it work.
Regards
Wilson Samuel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide