E1 R2 with signaling on channel 0 and 15?

[sstruckm]

I am trying to bring up a voice circuit in Buenos Aeries. The provider is telling me they use signalling on channel 0 for 1-15 and siignaling on channel 16 for 17-31. How can I configure my 3845 router with VWIC-MFT-E1 to support this? Standard E1 R2 config with argentina country option does not seem to work.

[paolo bevilacqua]

Hi, your provider may be is confusing the exact roles of channel 0 and 16, that is why he is saying that. I've found the following that references Argentina a bit.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5800/120t/5800_r2.htm

I understand that you may have seen it already and could not apply to your situation.

Good luck

[thisisshanky]

I think what they want is two signalling groups, so you will have two ds0-groups defined under the same controller interface.

Check this link

http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a00800873eb.html