09-27-2016 06:27 AM - edited 03-17-2019 08:12 AM
Dear,
I have router 2800 and ios is " C2800NM-ADVIPSERVICESK9-M " , and I have 30 cisco
please advise me how I enable a feature which let customers use PIN code number (or username) to login to their
my config is below
telephony-service
max-
max-
auto assign 1 to 3
max-conferences 8 gain -6
web admin system name Admin secret 5 $1$1pRE$OsEcq5MjpYej55TliEjIZ/
transfer-system full-consult
create
number 123
!
!
number 117
!
!
ephone-
number 111
ephone 1
device-security-mode none
mac-address 001B.535E.6BDB
type 7912
button 1:1
!
!
!
ephone 2
device-security-mode none
mac-address 001B.535E.6BF1
type 7912
button 1:2
!
!
!
!
!
device-security-mode none
mac-address 001B.5435.1367
type 7912
button 1:4
09-27-2016 07:10 AM
This is the Video Over IP community, please move to IP Telephony.
09-27-2016 09:35 PM
What you are looking for is a feature called extension mobility. Below are the steps
voice logout-profile 1
number 4001 type normal
!
voice logout-profile 1
number 4001 type normal
!
ephone 1
logout profile 1
!
voice register pool
logout profile 2
ephone-dn 3 octo
number 4003
!
voice reigster dn 3
number 4003
voice user-profile 1
pin 12345
user scp3 pass adgjm
number 4003 type normal
ip http server
telephony-service
url authentication http://<xxxxxx> #username #password
authentication credential #username #password
!
voice register global
url authentication http://<xxxxxx> #username #password
authentication credential #username #password
09-27-2016 11:29 PM
Dear
I have two questions
1) why you wrote two times profile 1?
2) what is number 4001 useful for ?
voice logout-profile 1
number 4001 type normal
!
voice logout-profile 1
number 4001 type normal
09-28-2016 12:17 AM
1) type mistake. It should be profile 1 and profile 2
2) This is a dummy number. However, its the one will be assigned to ephone or voice register pool which its in logout state. Logout profile should be assigned to ephone and/or voice register pool
09-28-2016 01:51 AM
Dear in my router 2811,
VoIP_HiwaGroup(config)#voice ?
call Voice call related configuration.
cause-code Sets the internal Q850 cause code mapping
class Control parameters class
disc-pi-incoming-on
emergency Emergency configuration commands
enum-match-table enum
hunt
hunt-group Define VOICE hunt group number
register voice
service Global packet telephony service commands
source-group Source Group configuration commands
statistics Voice Statistics
translation-profile Translation profile configuration commands
translation-rule Translation Rule configuration commands
09-28-2016 02:41 AM
Please share show version
09-28-2016 02:53 AM
VoIP_HiwaGroup#show version
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(15)T3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 24-Jan-08 15:26 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
VoIP_HiwaGroup uptime is 1 day, 20 hours, 33 minutes
System returned to ROM by reload at 14:30:47 UTC Mon Sep 26 2016
System restarted at 16:19:21 Iarq Mon Sep 26 2016
System image file is "flash:c2800nm-advipservicesk9-mz.124-15.T3.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2851 (revision 53.51) with 509952K/14336K bytes of memory.
Processor board ID FTX1204A27B
2 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
125440K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
09-28-2016 03:11 AM
I don't think Extension Mobility is supported on Advanced IP Services. You need to use Advanced Enterprise or IP/Voice. You can confirm this using Feature Navigator
09-29-2016 12:03 AM
Dear,
I changed version
System image file is "flash:c2800nm-adventerprisek9-mz.124-24.T5.bin"
and
voice logout-profile 1 and 2
but when
!
VoIP_HiwaGroup(config)#voice register pool ?
<1-110> voice-register-pool tag
VoIP_HiwaGroup(config)#voice register pool 1
Pool tag too large, maximum 0
10-03-2016 02:30 AM
update please
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide