10-11-2020 02:41 AM
Please, hai need to configure my phone sip by web. But no work.
Tanks.
10-11-2020 03:04 AM
Are the phones loaded with 3PCC firmware or not?
Look at the back of the phone. Look at the "Model" of the phone if there is "3PCC" in it or not. If it is NOT loaded with 3PCC then you will need to convert the phone firmware from Enterprise to 3PCC -- for a fee.
10-12-2020 11:24 PM
10-13-2020 12:22 AM
10-13-2020 12:45 AM
Am I correct to presume there is no CUCM?
10-13-2020 01:34 AM
I have CME version 12.0
the phones have cp-8851-k9 V11
the phones have cp-7811-k9 V05
10-13-2020 02:55 AM
As per my knowledge configuring the SIP phones on CME is possible with CLI and not with WEB. for SCCP phones we can do that with CME GUI.
if you are looking for accessing the phone webpage
Please try the following:
telephony-service
service phone webAccess 0
voice register global
create profiles
apply-config
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide