11-02-2011 07:49 PM - edited 03-16-2019 07:50 AM
I install a subscriber and im sure i put the right username and password,
i did this
•Username: pwrecovery
•Password: pwreset
The Welcome to admin password reset window displays.
but stil lgiving me an error. but i notice that when i try to ssh i put the password and i got this
Last login: Wed Nov 2 21:44:16 2011
/usr/local/platform/bin/cliscript.sh: Permission denied
11-02-2011 07:52 PM
11-14-2011 08:45 AM
I fixed this issue reinstalling the CUCM
now is working
01-10-2012 07:41 PM
Hi Alberto
how to reinstalling CUCM, i've tried to reinstall by inserting installation CD to MCS7825, but it is won't make install, it show message that the deployment cannot be done in this hardware.
please help
Regards,
Ahmad
01-10-2012 10:59 PM
kabiru_acer wrote:
Hi Alberto
how to reinstalling CUCM, i've tried to reinstall by inserting installation CD to MCS7825, but it is won't make install, it show message that the deployment cannot be done in this hardware.
1. Could you post the complete MCS server model ?
2. Also, are you trying to install directly on the MCS box or planning for VM installation as your previous CUCM 8.0.2 was on VM ?
GP.
01-10-2012 11:07 PM
Hi Gajanan,
thank you for your reply,
my server is MCS-7825I4, i try to directly installing the CUCM, the first install was done, but there are some problems related to database error, java, etc.
so i will to just blow it all by reinstall the CUCM, please advice
Regards,
Ahmad KR
01-10-2012 11:24 PM
Your server appears supported. Please locate the server model here http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
but with following note..
Supported, but note that Cisco Unified Communications Manager 5.0 and later require or recommend (depending on server model and software release) minimum memory and disk size as described in the table below. For Cisco Unified Communications Manager 8.0(3) and above, it is strongly recommended to upgrade to minimum 4GB RAM and 146GB disk drive; whether this is necessary for your deployment is design-dependent and depends on call volume, installed locales, dial plans, phone firmware loads, music files, etc. Use
http://www.cisco.com/go/swonly to get supported memory and disk part numbers Supported, but note that Cisco Unified Communications Manager 5.0 and later require or recommend (depending on server model and software release) minimum memory and disk size as described in the table below. For Cisco Unified Communications Manager 8.0(3) and above, it is strongly recommended to upgrade to minimum 4GB RAM and 146GB disk drive; whether this is necessary for your deployment is design-dependent and depends on call volume, installed locales, dial plans, phone firmware loads, music files, etc. Use http://www.cisco.com/go/swonly to get supported memory and disk part numbers
Pls rate the post if it helps.
GP.
01-11-2012 01:11 AM
Hi Gajana,
thanks for your help,
but how about the error, when i tried to reinstall CUCM, it can't be done by system, how typically to reinstall the CUCM
any idea about this ?
Regards,
Ahmad
01-11-2012 05:33 AM
Ahmad,
Are you trying to install CUCM 8.0.2 or any other version ?
Also following are the MCS 7825 I4 server models supported for 8.0.2, which one exactly is your's
MCS-7825-I4
MCS-7825-I4-IPC1
MCS7825I4-K9-CMA2
MCS7825I4-K9-CMB1
MCS7825I4-K9-CMB2
MCS7825I4-K9-CMC2
MCS7825I4-K9-CMD1
MCS7825I4-K9-IMED1
IBM x3250-M2
GP.
01-11-2012 06:41 PM
Hi Gajana,
my server is
MCS7825I4-K9-CMD1, actuallyi will install CUCM 8.6
what do you think ?
Regards.
AKR
01-11-2012 09:29 PM
Ahmad,
Yes, MCS7825I4-K9-CMD1 is supported with CUCM 8.6 but with following conditions. Consider upgrading your hardware resources as advised in the condition below & you should be able to install without any issues.
Condition :
Supported, but note that Cisco Unified Communications Manager 5.0 and later require or recommend (depending on server model and software release) minimum memory and disk size as described in the table below. For Cisco Unified Communications Manager 8.0(3) and above, it is strongly recommended to upgrade to minimum 4GB RAM and 146GB disk drive; whether this is necessary for your deployment is design-dependent and depends on call volume, installed locales, dial plans, phone firmware loads, music files, etc. Use
http://www.cisco.com/go/swonly to get supported memory and disk part numbers. Supported, but note that Cisco Unified Communications Manager 5.0 and later require or recommend (depending on server model and software release) minimum memory and disk size as described in the table below. For Cisco Unified Communications Manager 8.0(3) and above, it is strongly recommended to upgrade to minimum 4GB RAM and 146GB disk drive; whether this is necessary for your deployment is design-dependent and depends on call volume, installed locales, dial plans, phone firmware loads, music files, etc. Use http://www.cisco.com/go/swonly to get supported memory and disk part numbers.
Pls rate the post if it helps.
GP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide